Insert spoilboard, surfacing, rabbeting, flycutter, leveler and bed skimming router bits featuring a two-knife design. Engineered with an Amana-exclusive carbide grade for the highest quality of cut, maximum cutting efficiency, and faster material removal process.
These industrial router bits are complete with either two #HMA-12 or two #RCK-344 insert knives, each with four cutting edges that allow users to flip the knife over when one side becomes dull. To cut general purpose material use two (2) #AMA-12 insert knives (not for use on #RC-2242). Amana’s New Radius edge Cutter RC-2242 is best recommended to be used for planning/flattening in surfaces of large solid wood slabs with a handheld router in router sleds. Also known as a Surface Planing, Rabbeting, Flycutter, Fly Cutter, Leveler and Bed Skimming Router Bit.
Perfect for: - Resurfacing spoilboards using CNC
- Planing large glued up panels using CNC
- Surfacing and finishing wood using timber slab machines
- Rabbeting or slotting
RC-2241, RC-2242, RC-2243, RC-2245, RC-2248, RC-2254 & RC-2256: Also suitable for router sled machines, Make sure that your router sled is fully stable and squared.
Designed for planing & rabbeting large surface areas in the following materials:
- Fiberboard
- HDF/LDF
- High Density Urethane (HDU Board)
- MDF
- Balsa Core*
- Plastic*
- Plywood/Chipboard*
- Solidwood/Softwood*
- Ultra-High-Molecular-Weight Polyethylene (UHMWPE)
*For optimal results and maximum insert life, replace inserts with optional general purpose knives #AMA-12 (sold separately).
Note: Proper torques rating to tighten down screws is 2-3Nm Torques.
Max RPM = 24,000
#RC-2245 Max RPM = 18,000
#RC-2257 Max RPM = 19,000
#RC-2258 Max RPM = 13,000
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
