Amana Tool 45185-M CNC Nesting In-Presta 3 Flute Solid Carbide Cutting Edge Straight Plunge High Production 6mm D x 21mm CH x 12mm SHK x 77mm Long Router Bit

PRODUCT DETAILS

Click an item to expand and learn more

• Overview
  

  IN>PRESTA™ CNC Router Bits (item #45185-M and #45408-3)

  Up to 800 inches per minute!* 

  For cutting 3/4" material thickness in one pass

  3 Flute for improved surface finish

  Only 1/4" diameter equals minimal material waste

  • Excellent for nesting & grooving at an extremely fast feed rate which increases cost savings

  • 1/4" or 6mm cutting diameter CNC Nesting router bit with solid carbide cutting edges brazed into steel 1/2" shank

  • The unique design contributes to superb performance and excellent cutting results

  • Designed primarily for high speed CNC production

  • Long lasting harder carbide

  Excellent for Cutting: 

  • Laminated Particle Board, MDF & Melamine: Feed rate up to 800 IPM** at 18,000 RPM***
  • Plywood: Feed rate up to 500 IPM** at 18,000 RPM***

  * Up to 800 IPM feed rate at 18,000 RPM cutting laminated particle board. Rate may change depending on material and CNC machine type. 
  ** IPM: Inches Per Minute
  *** RPM: Revolutions Per Minute

  In choosing a straight bit for any application, always select one with the shortest cutting edges and the shortest overall length that will reach the required cut depth. Excessive length intensifies deflection and vibration, which degrade cut quality and lead to tool breakage. CNC Nesting In-Presta 3 Flute 

  • Extended life fine micro-grain harder carbide.
  • Superior geometric design
  • Advanced grinding technology that improves the carbides' resistance to wear
  • Super clean cuts
  • Carbide Tipped (unless noted otherwise)
  • Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced.

  Excellent for cutting:

  • Wood
  • MDF
  • Plywood

  

  IN>PRESTA™ CNC Router Bits (item #45185-M and #45408-3)

  Up to 800 inches per minute!* 

  For cutting 3/4" material thickness in one pass

  3 Flute for improved surface finish

  Only 1/4" diameter equals minimal material waste

  • Excellent for nesting & grooving at an extremely fast feed rate which increases cost savings

  • 1/4" or 6mm cutting diameter CNC Nesting router bit with solid carbide cutting edges brazed into steel 1/2" shank

  • The unique design contributes to superb performance and excellent cutting results

  • Designed primarily for high speed CNC production

  • Long lasting harder carbide

  Excellent for Cutting: 

  • Laminated Particle Board, MDF & Melamine: Feed rate up to 800 IPM** at 18,000 RPM***
  • Plywood: Feed rate up to 500 IPM** at 18,000 RPM***

  * Up to 800 IPM feed rate at 18,000 RPM cutting laminated particle board. Rate may change depending on material and CNC machine type. 
  ** IPM: Inches Per Minute
  *** RPM: Revolutions Per Minute
• Reviews
• Questions and Answers
• Downloads

  Tool No.

  CNC Feed/Speed

  Vectric .tool & Fusion .tools File

  AutoCad PDF/DXF File