Amana Tool RC-1145 CNC Insert V Groove 45 Deg x 13/16 D x 63/64 CH x 1/4 Inch SHK Router Bit

a°a° Degree	DDiameter	BCutting Height	B1	dShank	LOverall Length	a1°	# of Knives	General Purpose Knives	Optional MDF Knives	Screw #	Max RPM	L1
45°	13/16	63/64	1-1/16	1/4	2-5/16	22.5°	1	RCK-56	RCK-350	67117	35,000	1-3/8		Amana Tool RC-1145 CNC Insert V Groove 45 Deg x 13/16 D x 63/64 CH x 1/4 Inch SHK Router Bit More info

a°a° Degree

DDiameter

BCutting Height

dShank

LOverall Length

a1°

# of Knives

General Purpose Knives

Optional MDF Knives

Screw #

Max RPM

45°

13/16

63/64

1-1/16

1/4

2-5/16

22.5°

RCK-56

RCK-350

67117

35,000

1-3/8

PRODUCT DETAILS

Click an item to expand and learn more

Overview
CNC V Groove, Miter Fold & Signmaking Router Bits provide unique grinding angles to eliminate build up at the V point. Innovative CNC tool design with high grade solid carbide insert knife. For replacement knives, please scroll down below. The secure locking screw system ensures maximum safety and maintains cutting accuracy. CNC router requires quality hold downs to ensure the least possibility of material shifting during operation.

Get two uses out of each insert! Once insert knife show signs of wear you can rotate the insert for a brand new cutting edge, only for the following tool #'s: RC-1141, RC-1142, RC-1102, RC-1030, RC-1034, RC-1140, RC-1147, RC-1100, RC-1028, RC-1103, RC-1105 and RC-1146.

Replacement Torx® Key use #5005

For a perfect miter fold, use 91° #RC-1028 or RC-1028-TG. To miter fold MDF, please purchase optional MDF insert knives shown in table.
Each V Groove router bit comes complete with solid carbide insert knife/knives designed for general purpose use.

Advantages of Solid Carbide Insert CNC Tooling:
Long lasting insert knives provide superior, smooth quality cuts every time.
Insert tooling allows for harder grades of carbide.
Cost effective solution compared to replacing brazed router bits.
Excellent for cutting:

Aluminum, Brass, Bronze, Copper, Gold, Silver & Carbon Fiber (Engraving Only)
Acrylic/Plastic
Composites
Composite Decking
Foam
High-Density Polyethylene (HDPE)

High Pressure Laminate (HPL)

Laminate
Melamine
MDF/HDF
PVC
Sign Board
Solid Surface
Veneered Plywood
Wood
Xanita® Board*
20lbs High Density Urethane
*When working with Xanita LightBoard panel (X-board®, X-board® plus) we recommend using MDF knives for better results.
For best finishing results, blow hot air on the cut area while cutting, with a low feed rate of 500-1,000mm/min at RPM 6,000-10,000.
#RC-1104 is suitable for cutting Cristal Plexiglas.
#RC-1049 has a extra-long shank of 2-1/2"
Note: Items with a 1/2" shank do not have a screw/nut at the top of the shank.
Note: *RC-1028-TG is for ThermoGrip® CNC Heat Shrink Tool Holders

Warning:
Before using any insert tool, make sure the set screw is tightened firmly. When replacing a dull insert, first clean the tool and remove all dust prior to inserting the new knife.
Reviews
Questions and Answers
Downloads

Tool No.

CNC Feed/Speed

Vectric .tool & Fusion .tools File

AutoCad PDF/DXF File
Replacement Knife Instructions

Download Instructions for Replacing Insert Knives