PRODUCT DETAILS
Click an item to expand and learn more
-
Features:
- Complete Kit Included:
- (1) Grid Router Guide
- (1) Dovetail Router Bit
- (1) Relief Bit
- Dovetail Clamp Tracks Fast: Your fast, easy, and accurate tool for creating MatchFit Dovetail Clamp Track Grids.
- Most Versatile Clamping System: Create grids for clamping on panels of any size, from small sleds to full 4x8 sheets.
- Fast and Easy Operation: Simply set the depth, and let the guide do the work. No measuring, no marking, no straight edges or machines are required.
- No Measuring or Marking Needed: Self-indexing design ensures perfect 4" x 4" spacing with every cut.
- Router Compatibility: Fits most routers with 4"–7" bases and 1–3 HP motors. 1-3/8” Porter-Cable style bushing adapter required. Router sold separately.
Build the ultimate clamping setup—fast, easy, and accurate—with the MatchFit Grid Router Guide. Seamlessly create MatchFit Dovetail Grids and Dovetail Clamp Tracks. Create MatchFit Dovetail Clamping Grids on any size panel, eliminating the guesswork to get perfect results every time. Anywhere you can groove a dovetail track, you can clamp, secure, and confidently hold your work.
Clamp anywhere, craft everywhere.
Woodworking requires precision and control, and when it comes to setting up your clamping stations, nothing beats the MatchFit Grid Router Guide by Microjig.
Build the ultimate workbench with expansive clamping coverage and extra-wide end vises. Create our ZeroPlay 360 Sled for your table saw for cutting any angle. Make jigs and fixtures that are infinitely adjustable. Save time, money, and frustration with MatchFit Dovetail Tracks.
Self indexing base. No straight edges or machines needed.
Forget measuring, marking, or complicated setups. The MatchFit Grid Routing Guide features a self-indexing design that ensures perfect 4" groove spacing every time. Simply attach the base to your router, set the included bits to the correct depth, and guide it across your panel. The grooves align themselves as you work, creating a flawless grid quickly and accurately—whether you're working on a small sled or a full 4x8 sheet.
Create your own clamp tracks.
With MatchFit, you're not confined to pre-set clamp positions. Carve out your custom dovetail tracks on any wooden surface, enhancing your hold-down capabilities where you need them most. The Dovetail Track System gives you all the functionality of T-track, in less time and at a fraction of the cost.
Seamless dovetail integration: All MatchFit clamps slide into any 1/2" x 14º dovetail groove, transforming your setup into a unified clamping haven for unmatched efficiency.
Read More
- Complete Kit Included:
-
-
-
Why plastic?
The GRR-RIPPER is made of specially formulated high-impact plastics for good reason. It maintains its shape and rigidity, but also absorbs force if it makes contact with the blade. In other words, it won’t shatter or break your wrist.
I cut into my GRR-RIPPER, now what?
Every part of the GRR-RIPPER is individually replaceable, and compatible with all GRR-RIPPER models. Browse and swap out any damaged part with a replacement.
Will the GRR-RIPPER trip the sensor on my SawStop?
No. The plastic material will not trigger the safety mechanism on SawStop saws.
I have a GRR-RIPPER with black parts - will yellow replacement parts fit?
Yes - the design is exactly the same. Black and yellow GRR-RIPPER parts are interchangeable.
My GRR-RIPPER doesn’t seem as grippy as it used to - what gives?
Over time, dust and other contaminants can build up and compromise the effectiveness of the Green GRR-RIP material. Cleaning the gripping surface with denatured alcohol should restore your GRR-RIPPER to its original glorious grippy-ness. In rare cases, prolonged exposure to sunlight can damage the gripping material, so keep it out of direct sunlight.
Will the GRR-RIPPER work on my table saw?
It will work on any standard table saw with a fence and a blade.
Can I use the GRR-RIPPER with the blade guard on my table saw?
The GRR-RIPPER passes over the blade so there can’t be anything in the way. Don’t worry, the GRR-RIPPER is your moving blade guard.
Why would I need two GRR-RIPPERs?
We recommend using two GRR-RIPPERs when cutting stock longer than your table saw top. In order for the GRR-RIPPER to work properly, it needs to be on top of the material, with the material on the table stop. If you stop feeding material to reposition your GRR-RIPPER, the saw blade will leave blade marks and burning. With two GRR-RIPPERs, you can feed stock continuously using the hand-over-hand method, resulting in better cut quality.
Is the GRR-RIPPER OSHA compliant?
Yes. OSHA regulations state that “...in a workplace, regulations require that unsafe saws be removed from service immediately, push sticks or push blocks be provided at the work place for guiding or pushing material past the blade, and emphasis be placed on the cleanliness around woodworking machinery and, in particular, the effective functioning of guards and prevention of fire hazards. 29 CFR1910.213(s)
