Microjig DVC-850AP - MATCHFIT Dovetail Clamp AP

PRODUCT DETAILS

Click an item to expand and learn more

• Overview
  2-in-1 hold-down and in-line track clamp for jigs, fixtures, and assembly.

  Repetitive processes, FASTER.

  Create your own clamp tracks anywhere you can route a dovetail groove. Enjoy the same, limitless functionality as the standard Dovetail Clamps with three added benefits:

  1. Anti-Pivot technology keeps the clamp arm in place to make repetitive tasks faster.
  2. Included X-PAD™ applies force in two directions and helps you secure material with fewer clamps.
  3. Increased clamping range (to 8.5").

  Work faster with a clamp arm that won't drop.

  • The Anti-Pivot Coil Spring prevents the clamp arm from pivoting and dropping when switching workpieces in repetitive processes. Save time and work faster without having to reset your clamp height for every part.
  • Use any standard 1/2"–14° dovetail router bit to route your own tracks virtually anywhere. Clamp without limits, and never buy expensive T-track again.

  Clamp in two directions with a single clamp.

  • The included X-PAD™ simultaneously applies hold-down and in-line pressure as the clamp tightens. The combined forces keep your workpieces flat and eliminate the need for two or more different clamps.
  • The V-groove profile gives you two points of contact to clamp round or oblong stock with ease.

  Build jigs like never before.

  The MATCHFIT dovetail track system allows you to create your own tracks with just a router bit. It’s like an infinite supply of T-track without the cost of T-track.

  Create your own clamp tracks anywhere you can route.

  Simply route a groove anywhere you need using a 1/2”–14° dovetail router bit.

  Secure material with ZERO interference.

  The Dovetail Clamp AP slides below the surface, so you can secure material without the clamp getting in the way.

  Use with a spacer to secure material from a distance.

  A spacer provides in-line pressure—leaving the top of the material unobstructed for sanding, flattening, template routing or CNC work.

  Clamp round stock with ease.

  Turn the X-PAD™ 90º to clamp round and oblong-profile stock with a single clamp.

  What's Included:

  • (1) Dovetail Track Clamp™ AP
  • (1) X-PAD™ Attachment

   
• Reviews
• Questions and Answers
• FAQ

  How are these clamps different from other F-style clamps?

  They’re track clamps. The head of the MATCHFIT Dovetail Clamps are forged into a dovetail shape, compatible with any standard ½”–14° dovetail router bit. It moves through the track created by a router bit instead of an expensive metal t-track.

  Can’t I just do the same thing with dog holes?

  Not really.  Dog holes only allow clamps to go through the material with the head sticking out of the bottom.  Dog holes confine clamps to fixed locations, which aren’t always where you need them.  Dovetail Clamps can be positioned anywhere in a dovetail track, inside the material and out of the way.

  Do I need the MATCHFIT Dovetail Router Bit in order to use Dovetail Clamps and Dovetail Hardware?

  Only if you value your time.  Standard dovetail router bits cut to a sharp point at the top of the groove, which requires a decent amount of sanding after the track is routed.  Our router bit incorporates a 1/16” roundover to automatically smooth out the top of the track in a single pass.  Less time sanding means more time building. 

  Why dovetail tracks as opposed to T-slot?

  When tightening anything inside of a t-slot, the pressure is applied perpendicular to the material surface, which may weaken the integrity of the track.  If a t-slot is cut into plywood, all of the force is concentrated on the small flange at the bottom, causing the plywood to delaminate. With a dovetail profile, the clamping force is distributed evenly along the entire wall of the track for an overall stronger hold.

  Will MATCHFIT Dovetail Clamps and Dovetail Hardware fit into my Festool track?

  The clamps will not, the hardware will, but that’s kind of missing the point.  The MATCHFIT system was designed to be compatible with a standard router bit profile, so that users wouldn’t actually need metal tracks.  However, some users have been known to file or grind about .005” off of the wide part of the clamp’s elbow and use them in their Festool track.  Our advice is to use Festool clamps with Festool tracks, and use Dovetail Clamps for everything else.