How to Make a Jewelry Box on the CNC | ToolsToday

Making a small jewelry box (plans to make this yourself available below) on the Stepcraft M.1000 CNC machine using Amana Tool® industrial CNC router bits available on our website,
toolstoday.com/?utm_source=youtube&utm_medium=referral&utm_campaign=shop-cart

What do you think of how this CNC jewelry box project turned out?

The downloadable and customizable CNC plans are available on our website item no. JEWL_SM if you’d like to make for yourself!
toolstoday.com/small-wooden-jewelry-box-cnc-plans.html

With this design you will be able to make a very nice, tight fitting jewelry box with a personalized engraving inside! This is a small project, but there are a lot of toolpaths required to get the outcome we are looking for. In this set of plans I will walk you through finding the correct offset needed for your CNC machine to achieve a tight fitting box like this. The font used is mentioned in the plans so you can customize a date or add your own text. You can also size the box up or down depending on your needs as all the same principals would apply for a larger box.

Solid Carbide Spektra Extreme Tool Life Coated 30 Degree Engraving 0.005 Tip Width x 1/4 SHK x 2-1/4 Inch Long Signmaking Router Bit
toolstoday.com/v-14233-45771-k.html
RPM: 18,000
Feed Rate: 100ipm
Plunge Rate: 50ipm
Chip Load Per Tooth: 0.005”

Amana Tool 46202-K SC Spektra Extreme Tool Life Coated Spiral Plunge 1/4 Dia x 3/4 CH x 1/4 SHK 2-1/2 Inch Long Down-Cut Router Bit
toolstoday.com/v-13779-46202-k-bit.html
RPM: 18,000
Feed Rate: 180ipm
Plunge Rate: 90ipm