SC Spektra Extreme Tool Life Coated Spiral Flute Plunge 2 Flute Down-Cut Router Bits

PRODUCT DETAILS

Click an item to expand and learn more

• Overview
  WARNING! Due to the extremely small diameters involved, bits with smaller diameter of 1/8" are not guaranteed against breakage.

  
  

  
  

   

  Solid Carbide Spektra™ Extreme Tool Life Coated Spiral Plunge Down-Cut Router Bits feature unique, harder carbide with nACo® nanocomposite coating for longer tool lifetime. 

  Spiral-flute bits combine a shearing action in cutting with an augering action in chip clearance. The shearing action yields an especially clean accurate cut while the augering action clears chips from the cut. The ‘Down-Cut’ cuts from the surface down leaving a smooth edge at the surface.

  Special unique carbide grade increased clearance geometry and razor-sharp cutting edges with polished flutes provide a superior finish and longer tool life especially in abrasive materials. Great for production settings and excellent for creating grooves and dado cuts in particleboard plywood and laminate. Primarily used on CNC machines and other automatic routers. Can be used with handheld and table-mounted portable routers.

  Plunge shelf holes using a CNC machine: Item #'s 46211-K, 46211-L-K, 46210-K, 46212-K, 46214-K, 46216-K, 48219-K, 46220-K, 48224-K and 468228-K are specifically designed with a diameter to plunge shelf holes using a CNC machine. System 32 holes are a popular standard in cabinetry, this system refers to holes that placed at 32 mm intervals. System 32 holes are most commonly used for shelf pin holes.

  THE ONLY Spektra™ Coated Bits – Made in the USA 

  Amana Tool® solid carbide router bits provide consistent, repeatable quality. Every tool is guaranteed to match the geometry on the prints, every time on every order. Best control of carbide grades for woodworking, and absolute control of quality standards on all carbide blanks.

  Amana Tool Spektra™ bits feature a nACo® nanocomposite coating with an extreme nanohardness and heat resistance. With a brilliant, distinctively-tinted coloring, nACo provides additional improvements in four critical aspects of router tooling.

  • nACo coating is an micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
  • Coatings prevents high heat and oxidation which is detrimental to cutting tool performance.
  • Multi-colored hues, while attractive, will dissipate upon use and yet coating will remain fully effective.
  • nACo offers approximately 4,500 Vickers for impressive solid hardness on cutting areas of the tool, for an increase up to 2.5 times compared to uncoated bits.

  Excellent for Cutting:

  • Cork
  • Laminate
  • Melamine
  • Melamine Particle Board

  • MDF
  • Veneered Plywood
  • Wood

  Note: Blue based color dissipates immediately upon use. nACo® nanocomposite coating will not wear off

  Note: Item #46449-K designed with extra-long cut length, specifically for cutting for guitar bodies.

  WARNING! Due to the extremely small diameters involved, bits with smaller diameter of 1/8" are not guaranteed against breakage.

   

• Reviews
• Questions and Answers
• Videos

  How to Make a Bat Box | ToolsToday

  Making a Kitchen Countertop CNC Epoxy Salvage Slab | ToolsToday

  How to Make a Wooden Maze Game on CNC

  How to Make a Marble Game Board

  How to Make a Stove Cover Using Your CNC

  How to Make a Work Holding CNC Wasteboard

  Reclaimed Slab Epoxy Desk with Wireless Charger (Short Version)

  CNC Upcycling Project: Making a Guitar from Reclaimed Materials

  CNC Sign Making in Carbon Fiber with Engraving Bit

  CNC Project: Machining a Rainbow Landscape from Hardwood

  How to Make a 12 Foot Walnut Sign Using Shaper Origin

  How to Make a Clock on CNC

  How to Make: CNC Epoxy Coat Rack

  How to Make a GoPro Mount for the CNC

  How to Make: CNC Textured Inlay Sign

  How to Make a Snowman Catchall Tray on the CNC

  How to Make a Jewelry Box on the CNC

  How to Make a 2 Color CNC Sign

  How to Make Plywood Chair on CNC | ToolsToday Video

  How to Make Perpetual Wood Calendar, with CNC Plans | ToolsToday Video

  How to Make a Wine Caddy | ToolsToday CNC 4K Video

  How to Make a Jewelry Box Gift | ToolsToday CNC Video

  How to Make a Monster Truck Shelf using a Bike Tire | ToolsToday CNC Video

  How to Make a Wooden Modular Desk Organizer | ToolsToday CNC Video

• CA Prop 65 Warning
  

  WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.