PRODUCT DETAILS
Click an item to expand and learn more
-
Euro™ square bearing guides manufactured with a strong non-stick Teflon® which won't mark your edge so it can be wiped clean easily.
SQB100 Can be mounted to any 1/2" diameter Amana Tool flush trimmer.
SQB102 Can be mounted to any 3/4" diameter Amana Tool flush trimmer.- Leaves no marks on high-gloss, finished edges
- Use 1/2" diameter bit with laminate trimmers, use 3/4" diameter bit with routers
- Glue won't stick to bearing
- Beveled cutter means little or no hand filing
- Will not scratch high gloss laminates
- Beveled cutter can be resharpened
Note: Solvents should not be used to clean ball bearings, as this will deteriorate the special grease. 'Frozen' bearings (ones that do not rotate freely), should be replaced immediately. -
-
-
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.