CNC Ball Nose (Conical Ball) Solid Carbide Spiral 2D/3D Carving Tapered and Straight ZrN Coated Up-Cut Router Bits

$0.00

Free shipping on orders $49 and up

SEE OPTIONS BELOW

*Sort the Table by clicking on the Column Heading

DDiameter BCutting Height dShank LOverall Length RRadius a°a° Degree Flute Description Surface Coating Brand Tool No Our Price Wish List Ready To Buy

1/32

0.445

1/8

1/64

6.2°

Tapered Ball Nose

ZrN

Amana Tool

46291

Amana Tool 46291 CNC 2D and 3D Carving 6.2 Deg Tapered Angle Ball Nose x 1/32 D x 1/64 R x 0.445 CH x 1/8 SHK x 3 Inch Long x 3 Flute SC ZrN Coated Upcut Router Bit More info

$56.75$42.56

D	B	d	L	R	a°	Flute	Description	Surface Coating	Brand
1/32	0.445	1/8	3	1/64	6.2°	3	Tapered Ball Nose	ZrN	Amana Tool

Qty:

1/32

1/4

2-1/4

1/64

6.2°

Tapered Ball Nose

ZrN

Amana Tool

46280-S

Amana Tool 46280-S CNC 2D and 3D Carving 6.2 Deg Tapered Angle Ball Nose x 1/32 D x 1/64 R x 1 CH x 1/4 SHK x 2-1/4 Inch Long x 3 Flute SC ZrN Coated Upcut Router Bit More info

$73.50$55.13

D	B	d	L	R	a°	Flute	Description	Surface Coating	Brand
1/32	1	1/4	2-1/4	1/64	6.2°	3	Tapered Ball Nose	ZrN	Amana Tool

Qty:

1/32

1/4

1/64

6.2°

Tapered Ball Nose

ZrN

Amana Tool

46280

Amana Tool 46280 CNC 2D and 3D Carving 6.2 Deg Tapered Angle Ball Nose x 1/32 D x 1/64 R x 1 CH x 1/4 SHK x 3 Inch Long x 3 Flute SC ZrN Coated Upcut Router Bit More info

$74.25$55.69

D	B	d	L	R	a°	Flute	Description	Surface Coating	Brand
1/32	1	1/4	3	1/64	6.2°	3	Tapered Ball Nose	ZrN	Amana Tool

Qty:

1/32

1/4

1/64

6.2°

5-Pack Tapered Ball Nose (save 5%)

ZrN

Amana Tool

46280-5

Amana Tool 46280-5, 5-Pack CNC 2D and 3D Carving 6.2 Deg Tapered Angle Ball Nose x 1/32 D x 1/64 R x 1 CH x 1/4 SHK x 3 Inch Long x 3 Flute SC ZrN Coated Upcut Router Bits More info

$352.20$264.15

D	B	d	L	R	a°	Flute	Description	Surface Coating	Brand
1/32	1	1/4	3	1/64	6.2°	3	5-Pack Tapered Ball Nose (save 5%)	ZrN	Amana Tool

Qty:

1mm

1-7/64

1/4

2-23/64

0.5mm

5.4°

Tapered Ball Nose

ZrN

Amana Tool

46256

Amana Tool 46256 CNC 2D and 3D Carving 5.4 Deg Tapered Angle Ball Nose x 1mm D x 0.5mm R x 1-7/64 CH x 1/4 SHK x 2-23/64 Inch Long x 2 Flute SC ZrN Coated Upcut Router Bit More info

$74.65$55.99

D	B	d	L	R	a°	Flute	Description	Surface Coating	Brand
1mm	1-7/64	1/4	2-23/64	0.5mm	5.4°	2	Tapered Ball Nose	ZrN	Amana Tool

Qty:

1/16

0.362

1/8

1/32

5.4°

Tapered Ball Nose

ZrN

Amana Tool

46293

Amana Tool 46293 CNC 2D and 3D Carving 5.4 Deg Tapered Angle Ball Nose x 1/16 D x 1/32 R x 0.362 CH x 1/8 SHK x 3 Inch Long x 4 Flute SC ZrN Coated Upcut Router Bit More info

$56.75$42.56

D	B	d	L	R	a°	Flute	Description	Surface Coating	Brand
1/16	0.362	1/8	3	1/32	5.4°	4	Tapered Ball Nose	ZrN	Amana Tool

Qty:

1/16

1/4

2-1/4

1/32

5.5°

Tapered Ball Nose

ZrN

Amana Tool

46252-S

Amana Tool 46252-S CNC 2D and 3D Carving 5.5 Deg Tapered Angle Ball Nose x 1/16 D x 1/32 R x 1 CH x 1/4 SHK x 2-1/4 Inch Long x 2 Flute SC ZrN Coated Upcut Router Bit More info

$74.65$55.99

D	B	d	L	R	a°	Flute	Description	Surface Coating	Brand
1/16	1	1/4	2-1/4	1/32	5.5°	2	Tapered Ball Nose	ZrN	Amana Tool

Qty:

1/16

1/4

2-23/64

1/32

5.5°

Tapered Ball Nose

ZrN

Amana Tool

46252

Amana Tool 46252 CNC 2D and 3D Carving 5.5 Deg Tapered Angle Ball Nose x 1/16 D x 1/32 R x 1 CH x 1/4 SHK x 2-23/64 Inch Long x 2 Flute SC ZrN Coated Upcut Router Bit More info

$74.65$55.99

D	B	d	L	R	a°	Flute	Description	Surface Coating	Brand
1/16	1	1/4	2-23/64	1/32	5.5°	2	Tapered Ball Nose	ZrN	Amana Tool

Qty:

1/16

1/4

1/32

5.4°

Tapered Ball Nose

ZrN

Amana Tool

46282

Amana Tool 46282 CNC 2D and 3D Carving 5.4 Deg Tapered Angle Ball Nose x 1/16 D x 1/32 R x 1 CH x 1/4 SHK x 3 Inch Long x 4 Flute SC ZrN Coated Upcut Router Bit More info

$74.25$55.69

D	B	d	L	R	a°	Flute	Description	Surface Coating	Brand
1/16	1	1/4	3	1/32	5.4°	4	Tapered Ball Nose	ZrN	Amana Tool

Qty:

1/16

1/4

1/32

5.4°

5-Pack Tapered Ball Nose (save 5%)

ZrN

Amana Tool

46282-5

Amana Tool 46282-5, 5-Pack CNC 2D and 3D Carving 5.4 Deg Tapered Angle Ball Nose x 1/16 D x 1/32 R x 1 CH x 1/4 SHK x 3 Inch Long x 4 Flute SC ZrN Coated Upcut Router Bits More info

$352.20$264.15

D	B	d	L	R	a°	Flute	Description	Surface Coating	Brand
1/16	1	1/4	3	1/32	5.4°	4	5-Pack Tapered Ball Nose (save 5%)	ZrN	Amana Tool

Qty:

1/16

1-1/2

1/4

1/32

3.6°

Tapered Ball Nose

ZrN

Amana Tool

46281

Amana Tool 46281 CNC 2D and 3D Carving 3.6 Deg Tapered Angle Ball Nose x 1/16 D x 1/32 R x 1-1/2 CH x 1/4 SHK x 3 Inch Long x 3 Flute SC ZrN Coated Upcut Router Bit More info

$115.75$86.81

D	B	d	L	R	a°	Flute	Description	Surface Coating	Brand
1/16	1-1/2	1/4	3	1/32	3.6°	3	Tapered Ball Nose	ZrN	Amana Tool

Qty:

1/16

1-1/2

3/8

3-1/2

1/32

5.4°

Tapered Ball Nose

ZrN

Amana Tool

46582

Amana Tool 46582 CNC 2D and 3D Carving 5.4 Deg Tapered Angle Ball Nose x 1/16 D x 1/32 R x 1-1/2 CH x 3/8 SHK x 3-1/2 Inch Long x 4 Flute SC ZrN Coated Upcut Router Bit More info

$120.70$90.53

D	B	d	L	R	a°	Flute	Description	Surface Coating	Brand
1/16	1-1/2	3/8	3-1/2	1/32	5.4°	4	Tapered Ball Nose	ZrN	Amana Tool

Qty:

1/8

1/2

1/4

1/16

7°

Tapered Ball Nose

ZrN

Amana Tool

46288

Amana Tool 46288 CNC 2D and 3D Carving 7 Deg Tapered Angle Ball Nose x 1/8 D x 1/16 R x 1/2 CH x 1/4 SHK x 3 Inch Long x 3 Flute SC ZrN Coated Upcut Router Bit More info

$76.45$57.34

D	B	d	L	R	a°	Flute	Description	Surface Coating	Brand
1/8	1/2	1/4	3	1/16	7°	3	Tapered Ball Nose	ZrN	Amana Tool

Qty:

1/8

3/4

1/4

1/16

5°

Tapered Ball Nose

ZrN

Amana Tool

46287

Amana Tool 46287 CNC 2D and 3D Carving 5 Deg Tapered Angle Ball Nose x 1/8 D x 1/16 R x 3/4 CH x 1/4 SHK x 3 Inch Long x 3 Flute SC ZrN Coated Upcut Router Bit More info

$77.65$58.24

D	B	d	L	R	a°	Flute	Description	Surface Coating	Brand
1/8	3/4	1/4	3	1/16	5°	3	Tapered Ball Nose	ZrN	Amana Tool

Qty:

1/8

1/4

2-1/4

1/16

3.6°

Tapered Ball Nose

ZrN

Amana Tool

46286-S

Amana Tool 46286-S CNC 2D and 3D Carving 3.6 Deg Tapered Angle Ball Nose x 1/8 D x 1/16 R x 1 CH x 1/4 SHK x 2-1/4 Inch Long x 3 Flute SC ZrN Coated Upcut Router Bit More info

$73.50$55.13

D	B	d	L	R	a°	Flute	Description	Surface Coating	Brand
1/8	1	1/4	2-1/4	1/16	3.6°	3	Tapered Ball Nose	ZrN	Amana Tool

Qty:

1/8

1/4

1/16

3.6°

Tapered Ball Nose

ZrN

Amana Tool

46286

Amana Tool 46286 CNC 2D and 3D Carving 3.6 Deg Tapered Angle Ball Nose x 1/8 D x 1/16 R x 1 CH x 1/4 SHK x 3 Inch Long x 3 Flute SC ZrN Coated Upcut Router Bit More info

$74.25$55.69

D	B	d	L	R	a°	Flute	Description	Surface Coating	Brand
1/8	1	1/4	3	1/16	3.6°	3	Tapered Ball Nose	ZrN	Amana Tool

Qty:

1/8

1/4

1/16

3.6°

5-Pack Tapered Ball Nose (save 5%)

ZrN

Amana Tool

46286-5

Amana Tool 46286-5, 5-Pack CNC 2D and 3D Carving 3.6 Deg Tapered Angle Ball Nose x 1/8 D x 1/16 R x 1 CH x 1/4 SHK x 3 Inch Long x 3 Flute SC ZrN Coated Upcut Router Bits More info

$354.60$265.95

D	B	d	L	R	a°	Flute	Description	Surface Coating	Brand
1/8	1	1/4	3	1/16	3.6°	3	5-Pack Tapered Ball Nose (save 5%)	ZrN	Amana Tool

Qty:

1/8

1-1/2

1/8

1/16

0.10°

Straight Ball Nose

ZrN

Amana Tool

46295

Amana Tool 46295 CNC 2D and 3D Carving 0.10 Deg Straight Angle Ball Nose x 1/8 D x 1/16 R x 1-1/2 CH x 1/8 SHK x 3 Inch Long x 3 Flute SC ZrN Coated Upcut Router Bit More info

$58.60$43.95

D	B	d	L	R	a°	Flute	Description	Surface Coating	Brand
1/8	1-1/2	1/8	3	1/16	0.10°	3	Straight Ball Nose	ZrN	Amana Tool

Qty:

1/8

1-1/2

1/4

1/16

1°

Tapered Ball Nose

ZrN

Amana Tool

46284

Amana Tool 46284 CNC 2D and 3D Carving 1 Deg Tapered Angle Ball Nose x 1/8 D x 1/16 R x 1-1/2 CH x 1/4 SHK x 3 Inch Long x 3 Flute SC ZrN Coated Upcut Router Bit More info

$89.60$67.20

D	B	d	L	R	a°	Flute	Description	Surface Coating	Brand
1/8	1-1/2	1/4	3	1/16	1°	3	Tapered Ball Nose	ZrN	Amana Tool

Qty:

1/8

1-1/2

1/4

1/16

1°

5-Pack Tapered Ball Nose (save 5%)

ZrN

Amana Tool

46284-5

Amana Tool 46284-5, 5-Pack CNC 2D and 3D Carving 1 Deg Tapered Angle Ball Nose x 1/8 D x 1/16 R x 1-1/2 CH x 1/4 SHK x 3 Inch Long x 3 Flute SC ZrN Coated Upcut Router Bits More info

$426.75$320.06

D	B	d	L	R	a°	Flute	Description	Surface Coating	Brand
1/8	1-1/2	1/4	3	1/16	1°	3	5-Pack Tapered Ball Nose (save 5%)	ZrN	Amana Tool

Qty:

3/16

1/4

3/32

1°

Tapered Ball Nose

ZrN

Amana Tool

46298

Amana Tool 46298 CNC 2D and 3D Carving 1 Deg Tapered Angle Ball Nose x 3/16 D x 3/32 R x 1 CH x 1/4 SHK x 3 Inch Long x 3 Flute SC ZrN Coated Upcut Router Bit More info

$87.10$65.33

D	B	d	L	R	a°	Flute	Description	Surface Coating	Brand
3/16	1	1/4	3	3/32	1°	3	Tapered Ball Nose	ZrN	Amana Tool

Qty:

1/4

2-1/4

1/8

0.10°

Straight Ball Nose

ZrN

Amana Tool

46294-S

Amana Tool 46294-S CNC ZrN Coated SC 2D and 3D Carving 0.10 Deg Straight Angle Ball Nose x 1/4 D x 1/8 R x 1 CH x 1/4 SHK x 2-1/4 Inch Long x 2 Flute Upcut Router Bit More info

$60.90$45.68

D	B	d	L	R	a°	Flute	Description	Surface Coating	Brand
1/4	1	1/4	2-1/4	1/8	0.10°	2	Straight Ball Nose	ZrN	Amana Tool

Qty:

1/4

1/8

0.10°

Straight Ball Nose

ZrN

Amana Tool

46584

Amana Tool 46584 CNC 2D and 3D Carving 0.10 Deg Straight Angle Ball Nose x 1/4 D x 1/8 R x 1 CH x 1/4 SHK x 3 Inch Long x 4 Flute SC ZrN Coated Upcut Router Bit More info

$74.10$55.58

D	B	d	L	R	a°	Flute	Description	Surface Coating	Brand
1/4	1	1/4	3	1/8	0.10°	4	Straight Ball Nose	ZrN	Amana Tool

Qty:

1/4

1-1/2

1/4

1/8

0.10°

Straight Ball Nose

ZrN

Amana Tool

46294

Amana Tool 46294 CNC 2D and 3D Carving 0.10 Deg Straight Angle Ball Nose x 1/4 D x 1/8 R x 1-1/2 CH x 1/4 SHK x 3 Inch Long x 2 Flute SC ZrN Coated Upcut Router Bit More info

$79.70$59.78

D	B	d	L	R	a°	Flute	Description	Surface Coating	Brand
1/4	1-1/2	1/4	3	1/8	0.10°	2	Straight Ball Nose	ZrN	Amana Tool

Qty:

1/4

1-1/2

1/4

1/8

0.10°

5-Pack Straight Ball Nose (save 5%)

ZrN

Amana Tool

46294-5

Amana Tool 46294-5, 5-Pack CNC 2D and 3D Carving 0.10 Deg Straight Angle Ball Nose x 1/4 D x 1/8 R x 1-1/2 CH x 1/4 SHK x 3 Inch Long x 2 Flute SC ZrN Coated Upcut Router Bit More info

$378.15$283.61

D	B	d	L	R	a°	Flute	Description	Surface Coating	Brand
1/4	1-1/2	1/4	3	1/8	0.10°	2	5-Pack Straight Ball Nose (save 5%)	ZrN	Amana Tool

Qty:

1/4

1-3/8

1/2

1/8

5°

Tapered Ball Nose

ZrN

Amana Tool

46285

Amana Tool 46285 CNC 2D and 3D Carving 5 Deg Tapered Angle Ball Nose x 1/4 D x 1/8 R x 1-3/8 CH x 1/2 SHK x 4 Inch Long x 2 Flute SC ZrN Coated Upcut Router Bit More info

$190.25$142.69

D	B	d	L	R	a°	Flute	Description	Surface Coating	Brand
1/4	1-3/8	1/2	4	1/8	5°	2	Tapered Ball Nose	ZrN	Amana Tool

Qty:

1/4

1/2

1/8

3°

Tapered Ball Nose

ZrN

Amana Tool

46283

Amana Tool 46283 CNC 2D and 3D Carving 3 Deg Tapered Angle Ball Nose x 1/4 D x 1/8 R x 2 CH x 1/2 SHK x 4 Inch Long x 2 Flute SC ZrN Coated Upcut Router Bit More info

$191.65$143.74

D	B	d	L	R	a°	Flute	Description	Surface Coating	Brand
1/4	2	1/2	4	1/8	3°	2	Tapered Ball Nose	ZrN	Amana Tool

Qty:

3/8

2-1/4

3/8

3/16

0.10°

Straight Ball Nose

ZrN

Amana Tool

46494

Amana Tool 46494 CNC 2D and 3D Carving 0.10 Deg Straight Angle Ball Nose x 3/8 D x 3/16 R x 2-1/4 CH x 3/8 SHK x 4 Inch Long x 3 Flute SC ZrN Coated Upcut Router Bit More info

$121.40$109.26

D	B	d	L	R	a°	Flute	Description	Surface Coating	Brand
3/8	2-1/4	3/8	4	3/16	0.10°	3	Straight Ball Nose	ZrN	Amana Tool

Qty:

1/2

2-1/4

1/2

1/4

0.10°

Straight Ball Nose

ZrN

Amana Tool

46495

Amana Tool 46495 CNC 2D and 3D Carving 0.10 Deg Straight Angle Ball Nose x 1/2 D x 1/4 R x 2-1/4 CH x 1/2 SHK x 4 Inch Long x 3 Flute SC ZrN Coated Upcut Router Bit More info

$136.90$123.21

D	B	d	L	R	a°	Flute	Description	Surface Coating	Brand
1/2	2-1/4	1/2	4	1/4	0.10°	3	Straight Ball Nose	ZrN	Amana Tool

Qty:

PRODUCT DETAILS

Click an item to expand and learn more

Overview
Up-Cut Ball Nose for Superior Chip Ejection in CNC and CNC Carving Machines

Amana Tool®'s Modern Materials Finishing Geometry (MMFG) incorporates high shear, multi-flute and a Zirconium Nitride (ZrN) Coating designed for the ultimate combination of strength, finish and tool longevity in aerospace materials. Modern-day materials present challenges to the fabricator, using these special multi-flute edge tools featuring ZrN ceramic coating addresses these challenges with a winning geometry combination.

Applications:
A perfect bit for 3D carving

2D and 3D contouring, profiling, modeling and pattern making for cabinetry, sign making, furniture making and jewelry mold making

Dimensional signage

3D millwork
Precision 2D and 3D large scale carving

Great for deep profiling

Perfect for model-makers on large 3D milling profiles in abrasive EPS foam and other materials
The industrial router bits can be used in sign making & 3D Carving industries in MDF, Plastics, Bronze, Copper, Foam, Wood and other materials. The simultaneous 3-axis motion with the appropriate software allows full 3D capability that provides sign and 3D model makers the ability to work with any material.

The solid carbide tips cut smooth 2D and 3D contours with reduced stepping while the proprietary ZrN coating (applied by the physical vapor deposition coating process) provides high resistance to wear, sharper cutting edges, extended tool life and less friction & heat buildup.

The tapered design achieves high detail in deep cuts, improving the complexity and the detail of your finished work. The longer bits provide deeper cuts and larger slices with fewer passes, resulting in improved productivity and less assembly. These router bits are designed to last, saving you the costs of replacing lesser quality tools. These CNC cutting tools allow you to achieve precision, depth, unparalleled accuracy, detail and clarity in foam and other modern-day materials.

Benefits of ZrN Coating:
Creates incredibly precise detail work

Optimized flute geometry and low Total Indicated Runout (TIR) guarantees clean cuts, essentially eliminates sanding and reduces chatter when used with low TIR spindles

Creates a harder and tougher cutting ceramic over carbide edge, allowing for a prolonged cutting edge life and helps to prevent the build-up/galling of material in the flutes while cutting

PVD ceramic hardcoat designed for soft, gummy and abrasive materials

High aspect ratio for single pass deep-reach cutting

High flute volume supports high feed rates and chip loads. Has the ability to run and/or be spun much faster than uncoated tools

Flute geometry optimized for cutting sign foam, sign board, hardwoods, thermoplastics and phenolic composites
Excellent for cutting:

Acrylonitrile-Butadiene-Styrene (ABS)

Acrylic

Acrylic Stone

Aluminum

Brass

Bronze

Composite

Copper

Corian

Coroplast®*

Dibond®

Ethafoam***

Ethylene-vinyl Acetate Foam (EVA)

Expanded Polystyrene Foam (EPS)

Expanded Polypropylene (EPP)**

Extruded Polystyrene Foam (XPS)

Fiberglass

Fiberglass PCB Board

Foam Board

Graphite

HDPE

HDU

20lbs High Density Urethane

Ice

MDF/HDF

PALFOAM™

Polyethylene (PE) Foam*

Phenolics

Plastics

Phenolic Composites

Polycarbonate (Lexan™)

Poly (methyl methacrylate) (PMMA)

Polyethylene (PE) Foam***

Polylam***

Polyurethane Foam

PVC

PVC Foam Board

Sign Board

Sign Foam

Titanium

Tooling Board

Wood

XPE (Cross Linked Polyethylene) Foam
WARNING! Never attempt to cut ferrous metals with these bits. Inspect cut quality and adjust feed / speed accordingly.

Note: Tools are manufactured with high balance, that allows them to run up to 60,000 RPM. Adjust your chip load and feed rate accordingly.For optimal results and extended tool life use mist lubricant system or air cooling.

*Coroplast® is soft plastic cardboard made with super soft, super flexible PVC.
**Expanded polypropylene (EPP) is a foam form of polypropylene.
***Ethafoam, Polyethylene and Polylam are durable, flexible, closed-cell foams with excellent memory.

Milling Plastics: In a milling application, all plastics tend to behave differently so attention must be paid first and foremost to heat input, as that greatly impacts surface finish and chip control. Some of Amana Tool carving tools, as you can appreciate has a very small diameter and so any material chip-loads need to reflect that small size. It can however withstand RPM’s up to 60,000 RPMs. A directed air-blast to keep chips away along with cooling the tool and work piece are always welcome. Suggested starting spindle speed might be 18,000 RPM, there needs to be some experimenting on the part of the programmer to best find an acceptable finish.
Cutting materials such as HDPE and Plastics its highly recommended to direct an air blast at the router bit to help keep the material cool while clearing away fragments from the cutting area. If possible run a high chip load in the order of .005" and up, per flute. Running your CNC machine at the rate of 10,000 RPM x 2 flutes x .005" per flute equals 100 inches per minute feed rate. When cutting plastics it is expected to experience some burring on top edge.
Reviews
Questions and Answers
Products Included

Set #AMS-110 includes the following:
Tool No
Description
Product Page
46252
CNC 2D and 3D Carving 5.5° Tapered Angle Ball Tip x 1/16 Dia x 1/32 Radius x 1 x 1/4 Shank x 2-23/64 Inch Long x 2 Flute Solid Carbide ZrN Coated Router Bit
View Details
46254
CNC 2D and 3D Carving Flat Bottom x 0.10 Deg Angle x 1/8 Dia x 15/32 x 1/4 Shank x 2-23/64 Inch Long x 2 Flute Solid Carbide ZrN Coated Router Bit
View Details
46256
CNC 2D and 3D Carving 5.5° Tapered Angle Ball Tip x 1mm Dia x 0.5mm Radius x 1-7/64 x 1/4 Shank x 2-23/64 Inch Long x 2 Flute Solid Carbide ZrN Coated Router Bit
View Details
Set #AMS-136 includes the following:
(Stored in solid wood showcase storage box with a Plexiglass® clear lid)
Tool No
Description
Product Page
46280
1/32" Dia x 1" Cut Height x 6.2° Tapered Angle Ball Nose Tip x 1/4 Shank ZrN Coated 3-Flute Solid Carbide 2D and 3D Carving Router Bit
View Details
46282
1/16" Dia x 1" Cut Height x 5.4° Tapered Angle Ball Nose Tip x 1/4" Shank ZrN Coated 4-Flute Solid Carbide 2D and 3D Carving Router Bit
View Details
46284
1/8" Dia x 1-1/2" Cut Height x 1° Tapered Angle Ball Nose Tip x 1/4" Shank ZrN Coated 3-Flute Solid Carbide 2D and 3D Carving Router Bit
View Details
46286
1/8" Dia x 1" Cut Height x 3.6° Tapered Angle Ball Nose Tip x 1/4" Shank ZrN Coated 3-Flute Solid Carbide 2D and 3D Carving Router Bit
View Details
46288
1/8" Dia x 1/2" Cut Height x 7° Tapered Angle Ball Nose Tip x 1/4" Shank ZrN Coated 3-Flute Solid Carbide 2D and 3D Carving Router Bit
View Details
46290
1/16" Dia x 5/16" Cut Height x 1/4" Shank Flat Bottom ZrN Coated 3-Flute Solid Carbide 2D and 3D Carving Router Bit
View Details
46292
1/8" Dia x 1-3/32" Cut Height x 1/4" Shank Flat Bottom ZrN Coated 4-Flute Solid Carbide 2D and 3D Carving Router Bit
View Details
46294
1/4" Dia x 1/2" Cut Height x 0.10° Straight Angle Ball Nose Tip x 1/4" Shank ZrN Coated 2-Flute Solid Carbide 2D and 3D Carving Router Bit
View Details
Set #AMS-141 includes the following:
Tool No
Description
Product Page
46284
1/8" Dia x 1-1/2" Cut Height x 1° Tapered Angle Ball Nose Tip x 1/4" Shank ZrN Coated 3-Flute Solid Carbide 2D and 3D Carving Router Bit
View Details
46288
1/8" Dia x 1/2" Cut Height x 7° Tapered Angle Ball Nose Tip x 1/4" Shank ZrN Coated 3-Flute Solid Carbide 2D and 3D Carving Router Bit
View Details
46290
1/16" Dia x 5/16" Cut Height x 1/4" Shank Flat Bottom ZrN Coated 3-Flute Solid Carbide 2D and 3D Carving Router Bit
View Details
46292
1/8" Dia x 1-3/32" Cut Height x 1/4" Shank Flat Bottom ZrN Coated 4-Flute Solid Carbide 2D and 3D Carving Router Bit
View Details
Set #AMS-142 includes the following:
Tool No
Description
Product Page
46282
1/16" Dia x 1" Cut Height x 5.4° Tapered Angle Ball Nose Tip x 1/4" Shank ZrN Coated 4-Flute Solid Carbide 2D and 3D Carving Router Bit
View Details
46284
1/8" Dia x 1-1/2" Cut Height x 1° Tapered Angle Ball Nose Tip x 1/4" Shank ZrN Coated 3-Flute Solid Carbide 2D and 3D Carving Router Bit
View Details
46294
1/4" Dia x 1/2" Cut Height x 0.10° Straight Angle Ball Nose Tip x 1/4" Shank ZrN Coated 2-Flute Solid Carbide 2D and 3D Carving Router Bit
View Details

Set #AMS-143 includes the following:
(Stored in solid wood showcase storage box with a Plexiglass® clear lid)
Tool No
Description
Product Page
46280
1/32" Dia x 1" Cut Height x 6.2° Tapered Angle Ball Nose Tip x 1/4 Shank ZrN Coated 3-Flute Solid Carbide 2D and 3D Carving Router Bit
View Details
46282
1/16" Dia x 1" Cut Height x 5.4° Tapered Angle Ball Nose Tip x 1/4" Shank ZrN Coated 4-Flute Solid Carbide 2D and 3D Carving Router Bit
View Details
46284
1/8" Dia x 1-1/2" Cut Height x 1° Tapered Angle Ball Nose Tip x 1/4" Shank ZrN Coated 3-Flute Solid Carbide 2D and 3D Carving Router Bit
View Details
46286
1/8" Dia x 1" Cut Height x 3.6° Tapered Angle Ball Nose Tip x 1/4" Shank ZrN Coated 3-Flute Solid Carbide 2D and 3D Carving Router Bit
View Details
46288
1/8" Dia x 1/2" Cut Height x 7° Tapered Angle Ball Nose Tip x 1/4" Shank ZrN Coated 3-Flute Solid Carbide 2D and 3D Carving Router Bit
View Details
46294
1/4" Dia x 1/2" Cut Height x 0.10° Straight Angle Ball Nose Tip x 1/4" Shank ZrN Coated 2-Flute Solid Carbide 2D and 3D Carving Router Bit
View Details
46290
1/16" Dia x 5/16" Cut Height x 1/4" Shank Flat Bottom ZrN Coated 3-Flute Solid Carbide 2D and 3D Carving Router Bit
View Details
46292
1/8" Dia x 1-3/32" Cut Height x 1/4" Shank Flat Bottom ZrN Coated 4-Flute Solid Carbide 2D and 3D Carving Router Bit
View Details
46291
1/32" Dia x 0.445" Cut Height x 6.2° Tapered Angle Ball Nose Tip x 1/8" Shank ZrN Coated 3-Flute Solid Carbide 2D and 3D Carving Router Bit
View Details
46295
1/8" Dia x 1-1/2" Cut Height x 0.10° Straight Angle Ball Nose Tip x 1/8" Shank ZrN Coated 4-Flute Solid Carbide 2D and 3D Carving Router Bit
View Details
46287
1/32" Dia x 0.445" Cut Height x 6.2° Tapered Angle Ball Nose Tip x 1/"8 Shank ZrN Coated 3-Flute Solid Carbide 2D and 3D Carving Router Bit
View Details
46570
1/32" Dia x 1" Cut Height x 6.2° Tapered Angle Ball Nose Tip x 1/4" Shank ZrN Coated 3-Flute Solid Carbide 2D and 3D Carving Router Bit
View Details
46572
1/16" Dia x 1" Cut Height x 5.4° Tapered Angle Ball Nose Tip x 1/4" Shank ZrN Coated 4-Flute Solid Carbide 2D and 3D Carving Router Bit
View Details
46574
1/8" Dia x 1-1/2" Cut Height x 0.10° Straight Angle Ball Nose Tip x 1/8" Shank ZrN Coated 4-Flute Solid Carbide 2D and 3D Carving Router Bit
View Details
46490
1/4" Dia x 1/2" Cut Height x 0.10° Straight Angle Ball Nose Tip x 1/4" Shank ZrN Coated 3-Flute Solid Carbide 2D and 3D Carving Extra Long Reach Router Bit
View Details
46590
1/4" Dia x 1/2" Cut Height x 0.10° Straight Angle x 1/4" Shank Flat Bottom ZrN Coated 3-Flute Solid Carbide 2D and 3D Carving Extra Long Reach Router Bit
View Details
46094
1/4" Dia x 3/4" Cut Height x Straight Angle x 1/4" Shank ZrN Coated 3-Flute Solid Carbide Composite & Fiberglass Cutting Router Bit
View Details
46090
1/8" Dia x 1/2" Cut Height x 1/4" Shank ZrN Coated 3-Flute Solid Carbide Composite & Fiberglass Cutting Router Bit
View Details
RB-102
1/4" to 1/8" Router Collet Reducer
View Details

Set #AMS-144 includes the following:
Tool No
Description
Product Page
46280
1/32" Dia x 1" Cut Height x 6.2° Tapered Angle Ball Nose Tip x 1/4 Shank ZrN Coated 3-Flute Solid Carbide 2D and 3D Carving Router Bit
View Details
46282
1/16" Dia x 1" Cut Height x 5.4° Tapered Angle Ball Nose Tip x 1/4" Shank ZrN Coated 4-Flute Solid Carbide 2D and 3D Carving Router Bit
View Details
46286
1/8" Dia x 1" Cut Height x 3.6° Tapered Angle Ball Nose Tip x 1/4" Shank ZrN Coated 3-Flute Solid Carbide 2D and 3D Carving Router Bit
View Details
Set #AMS-145 includes the following:
Tool No
Description
Product Page
46290
1/16" Dia x 5/16" Cut Height x 1/4" Shank Flat Bottom ZrN Coated 3-Flute Solid Carbide 2D and 3D Carving Router Bit
View Details
46292
1/8" Dia x 1-3/32" Cut Height x 1/4" Shank Flat Bottom ZrN Coated 4-Flute Solid Carbide 2D and 3D Carving Router Bit
View Details
46294
1/4" Dia x 1/2" Cut Height x 0.10° Straight Angle Ball Nose Tip x 1/4" Shank ZrN Coated 2-Flute Solid Carbide 2D and 3D Carving Router Bit
View Details
Set #AMS-146 includes the following:
Tool No
Description
Product Page
46282
1/16" Dia x 1" Cut Height x 5.4° Tapered Angle Ball Tip x 1/4" Shank ZrN Coated 3-Flute Solid Carbide 2D and 3D Carving Router Bit
View Details
46286
1/8" Dia x 1" Cut Height x 3.6° Tapered Angle Ball Tip x 1/4" Shank ZrN Coated 3-Flute Solid Carbide 2D and 3D Carving Router Bit
View Details
46294
1/4" Dia x 1/2" Cut Height x 0.10° Straight Angle Ball Tip x 1/4" Shank ZrN Coated 2-Flute Solid Carbide 2D and 3D Carving Router Bit
View Details
Set #AMS-148 includes the following:
Tool No
Description
Product Page
46280
1/32" Dia x 1" Cut Height x 6.2° Tapered Angle Ball Nose Tip x 1/4 Shank ZrN Coated 3-Flute Solid Carbide 2D and 3D Carving Router Bit
View Details
46282
1/16" Dia x 1" Cut Height x 5.4° Tapered Angle Ball Nose Tip x 1/4" Shank ZrN Coated 4-Flute Solid Carbide 2D and 3D Carving Router Bit
View Details
46286
1/8" Dia x 1" Cut Height x 3.6° Tapered Angle Ball Nose Tip x 1/4" Shank ZrN Coated 3-Flute Solid Carbide 2D and 3D Carving Router Bit
View Details
46294
1/4" Dia x 1/2" Cut Height x 0.10° Tapered Angle Ball Nose Tip x 1/4" Shank ZrN Coated 2-Flute Solid Carbide 2D and 3D Carving Router Bit
View Details
Set #AMS-185 Includes the Following Tools:
Tool No
Description
Product Page
46280
1/32" Dia x 1" Cut Height x 6.2° Tapered Angle Ball Nose Tip x 1/4 Shank ZrN Coated 3-Flute Solid Carbide 2D and 3D Carving Router Bit
View Details
46282
1/16" Dia x 1" Cut Height x 5.4° Tapered Angle Ball Nose Tip x 1/4" Shank ZrN Coated 4-Flute Solid Carbide 2D and 3D Carving Router Bit
View Details
46294
1/4" Dia x 1/2" Cut Height x 0.10° Straight Angle Ball Nose Tip x 1/4" Shank ZrN Coated 2-Flute Solid Carbide 2D and 3D Carving Router Bit
View Details
Videos

CNC Project: 3D Lunar Carving
Aluminum 3D Robot Carved with Amana CNC Bits
Wood Frame Carved for Aluminum Robot
Alien Zoo Fixture Board with 3D Carving ZrN Bits
American Bald Eagle 3D Brass Coin CNC Project
Alien Deco Foam with 3D Carving ZrN CNC Bits
Golden Dragon 3D Foam CNC Project with ZrN Bits
3D Brass Indian Head CNC Project with ZrN Bits
Whiskey Lid CNC Project with 3D ZrN Router Bits
ReadWoodworker Review of 8-Pc Set
View Photo Gallery
CNC 3D Milling
and Carving
View closeup images of CNC doghouse project
CA Prop 65 Warning

WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood .